+90 362 312 1919

Yayınlar

ULUSAL ve ULUSLARARASI YAYINLAR (ÖZGÜN MAKALE, KİTAP VE KİTAP BÖLÜMÜ)

2023 Yılı Yayınları

  1. Al-Samet, Mohammed AMM, and Engin Burgaz. "Improving the lithium-ion diffusion and electrical conductivity of LiFePO4 cathode material by doping magnesium and multi-walled carbon nanotubes." Journal of Alloys and Compounds 947 (2023): 169680
  2. Tim Tjardts, Marie Elis, Martin Hicke, Fabian Symalla, Josiah Shondo, Mehmet Kuru, Niklas Wolff, Franz Faupel, ORAL CENK AKTAŞ,SALİH VEZİROĞLU,Lorenz Kienle. "Critical assessment of a TiO2-Ag-ZnO nanocomposite photocatalyst on improved photocatalytic activity under mixed UV-visible light". Applied Surface Science Advances 18 (2023), 100500
  3. Arkan, M. Z., Kinas, Z., Yalçın, E., Arkan, E., Özel, F., Karabiber, A., ... Chorążewski, M.(2023). One Material-Opposite Triboelectrification: Molecular Engineering Regulated Triboelectrification on Silica Surface to Enhance TENG Efficiency. Molecules , vol.28, no.15.
  4. Yalçın, E., Aktas, E., Mendéz, M., Arkan, E., Sánchez, J. G., Martínez-Ferrero, E., ... Silvestri, F.(2023). Monodentate versus Bidentate Anchoring Groups in Self-Assembling Molecules (SAMs) for Robust p-i-n Perovskite Solar Cells. ACS Applied Materials and Interfaces.
  5. Mutuk, T., Arpacıoğlu, K., Alışır, S., & Demir, G. (2023). "Thermal and mechanical evaluation of natural fibers reinforced gypsum plaster composite." Journal of Metals, Materials and Minerals, 33(1), 116–123.
  6. Döleker, K. M., Özgürlük, Y., Gökçekaya, Ö., Günen, A., & Erdoğan, A. (2023). "High-temperature corrosion and oxidation properties of borided CoCrFeNiAl0 5Nb0 5 HEA." Surface and Coatings Technology, 470, 129856–0.
  7. Kafalı, M., Döleker, K. M., Erdoğan, A., Sünbül, S. E., İçin, K., Yıldız, A., & Gök, M. S. (2023). "Wear corrosion and oxidation characteristics of consolidated and laser remelted high entropy alloys manufactured via powder metallurgy." Surface and Coatings Technology, 467, 129704–0.
  8. İçin, K., Sünbül, S. E., Erdoğan, A., & Döleker, K. M. (2023). "A comparative study on the surface degradation mechanisms of arc melted and laser remelted CoCrFeNiAl0 5Nb0 5 HEA." Surface and Coatings Technology, 463, 129534–0.
  9. Kılıç Dokan, F., Kuru, M., Özlü Torun, H., & Öztürk, E. (2023). "The Effect of Different Molar Ratios of CeO2 on Photoluminescence Properties of CeO2 TiO2 Nanoparticles." CSIR-National Institute of Science Communication and Policy Research (NIScPR), 0–0.
  10. Arkan, M. Z., Kinas, Z., Yalçın, E., Arkan, E., Özel, F., Karabiber, A., & Chorazewski, M. (2023). "One Material-Opposite Triboelectrification Molecular Engineering Regulated Triboelectrification on Silica Surface to Enhance TENG Efficiency." MDPI AG, 28, 0–0.

2022 Yılı Yayınları

  1. Ozlek, M., Burgaz, E., Inanc, I., & Andac, M. (2022). "The structural and ionic conductivity analysis of poly (ethylene oxide)/LiTFSI/MOF-5 nanocomposite electrolytes by using molecular dynamics simulations." Ionics, 1-14.
  2. Yener, T., Doleker, K. M., Erdogan, A., Oge, M., Er, Y., Karaoglanli, A. C., & Zeytin, S. (2022). Wear and oxidation performances of low temperature aluminized IN600. Surface and Coatings Technology, 436, 128295.
  3. Küçük, Y., Döleker, K. M., Gök, M. S., Dal, S., Altınay, Y., & Erdoğan, A. (2022). "Microstructure, hardness and high temperature wear characteristics of boronized Monel 400." Surface and Coatings Technology, 436, 128277.
  4. Ersun, H. B., & Doleker, K. M. (2022). "The influence of Al addition and aluminizing process on oxidation performance of arc melted CoCrFeNi alloy." Vacuum, 196, 110749.
  5. Suna Avcıoğlu, Pınar Uyan, Onur Yontar, Sinem Çevik, “Electrospray Deposition of AlN-PVA Composite Coating As Thermal Interface Material”, Materials Letters, Vol. 318, 1-4, (2022).
  6. Tuğba Mutuk, Sinem Çevik, Eren Tiryaki, "1010 ÇELİĞİ ÜZERİNE ELEKTROSPREY YÖNTEMİ İLE KAPLANAN NANO-ALÜMİNA KAPLAMALARIN AŞINMA DAVRANIŞI", OMUJEST, Cilt 2 ,2022
  7. Mehmet Kuru, Fatma Kılıç Dokan, Tuğba Şaşmaz Kuru, "Structural, electrical and magnetic characterization of Al3+ substituted Mg–Zn ferrites." Appl. Phys. A 128, 286 (2022)
  8. Alışır, S. & Evrensel, D. (2022). "Investigation of Tribological Properties of TiAlCN Coated Piston Ring." Erzincan University Journal of Science and Technology, 15 (1) , 269-285.
  9. Demircan O, Uzunoglu FB, Ansaroudi NR. (2022). "Influence of multi-walled carbon nanotubes on tensile and flexural properties of polyamide 66 short glass fiber composites." Research on Engineering Structures and Materials, 8(4), 659–674.
  10. Demircan, Ö., Sufyan, S., & Basem, A. (2022). "Tensile and charpy impact properties of CNTs integrated PET Glass Fiber thermoplastic composites with commingled yarn." Research on Engineering Structures and Materials, 0–0.
  11. Darama, S. E., Mesci Oktay, B., & Çoruh, S. (2022). "INVESTIGATION OF THE USE OF WALNUT SHELLS AS A NATURAL BIOSORBENT FOR ZINC REMOVAL." Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 25(4), 556–564.
  12. Baş, H., Yapıcı, F., & İnanç, İ. (2022). "YAPIŞKAN PÜSKÜRTME YÖNTEMİMDE ÜRETİM PARAMETRELERİNİN ÖNEMİ VE ÖRNEK UYGULAMA." Muhendislik Bilimleri ve Tasarim Dergisi, 10(4), 1354–1361.

2021 Yılı Yayınları

  1. Alsamet, Mohammed AMM, and Engin Burgaz. "Synthesis and characterization of nano-sized LiFePO4 by using consecutive combination of sol-gel and hydrothermal methods." Electrochimica Acta 367 (2021): 137530.
  2. Kelarakis, Antonios, Marta Krysmann, Joanna Stachowska, Andrew Murphy, Claire Mellor, Ella Gibbons, Diogo Fernandes, Engin Burgaz, Stephen Yeates, and Joshua Moore. "A rich gallery of Carbon dots based photoluminescent suspensions and powders derived by citric acid/urea." Scientific Reports (2021).
  3. Özgür Demircan, Umut Ahmet Simsek, Investigation of the Effect of CNTs on the Mechanical Properties of Biaxial Weft-knitted Thermoplastic Composites, Fibers and Polymers 22 (8), 2285-2295
  4. Ö Demircan, NR Ansaroudi, FB Uzunoğlu, Tensile and flexural properties of MWCNT-COOH and hBN integrated polyamide 66/short glass fiber composites, Res. Eng. Struct. Mater., 2022; 8(1): 1-18.
  5. Ö Demircan, TERMOSET MATRİSLİ KOMPOZİT MALZEMELERİN BİRLEŞTİRİLMESİ, YENİLİKÇİ ÖLÇME YÖNTEMLERİ VE TASARIMLAR: MÜHENDİSLİK UYGULAMALARI, (Kitap bölümü)
  6. Kilicoglu Ozge, Kara Umit, Inanc İbrahim, (2021), The impact of polymer additive for N95 masks on gamma-ray attenuation properties, Materials Chemistry and Physics 260, 124093.
  7. Doleker, K. M., Erdogan, A. and Zeytin, S. (2021). " Laser re-melting influence on isothermal oxidation behavior of electric current assisted sintered CoCrFeNi, CoCrFeNiAl0.5 and CoCrFeNiTi0.5Al0.5 high entropy alloys" Surface and Coatings Technology 399: 126179.
  8. Doleker, K. M., Ozgurluk, Y., Kahraman, Y. and Karaoglanli, A. C. (2021). "Oxidation and Hot Corrosion Resistance of HVOF/EB-PVD Thermal Barrier Coating System" Surface and Coatings Technology 409: 126862.
  9. Günen, A., Döleker, K. M., Korkmaz, M. E., Gök, M. S., Erdogan, A. (2021) "Characteristics, High Temperature Wear and Oxidation Behavior of Boride Layer Grown on Nimonic 80A Ni-based Superalloy" Surface and Coatings Technology 409: 126906.
  10. Ozgurluk, Y., Doleker, K. M., Ahlatci, H., and Karaoglanli, A. C. (2021). " Investigation of Calcium–Magnesium-Alumino-Silicate (CMAS) resistance and hot corrosion behavior of YSZ and La2Zr2O7/YSZ thermal barrier coatings (TBCs) produced with CGDS method" Surface and Coatings Technology 126969.
  11. Doleker, K. M., Ozgurluk, Y., & Karaoglanli, A. C. (2021). TGO growth and kinetic study of single and double layered TBC systems. Surface and Coatings Technology, 415, 127135.
  12. Günen, A., Döleker, K. M., Korkmaz, M. E., Gök, M. S., & Erdogan, A. (2021). Characteristics, high temperature wear and oxidation behavior of boride layer grown on nimonic 80A Ni-based superalloy. Surface and Coatings Technology, 409, 126906.
  13. Döleker, K. M., Erdogan, A., Yener, T., Karaoglanlı, A. C., Uzun, O., Gök, M. S., & Zeytin, S. (2021). Enhancing the wear and oxidation behaviors of the Inconel 718 by low temperature aluminizing. Surface and Coatings Technology, 412, 127069.
  14. Erdogan, A., Yener, T., Doleker, K. M., Korkmaz, M. E., & Gök, M. S. (2021). Low-temperature aluminizing influence on degradation of nimonic 80A surface: Microstructure, wear and high temperature oxidation behaviors. Surfaces and Interfaces, 25, 101240.
  15. Öksüzoğlu, E., & Döleker, K. M. 904L Paslanmaz Çeliğe Düşük Sıcaklık Alüminyumlamanın Etkisi. European Journal of Science and Technology, (28), 1102-1106.
  16. Erdogan, A., Sunbul, S. E., Icin, K., Doleker, K. M. (2021). " Microstructure, wear and oxidation behavior of AlCrFeNiX (X= Cu, Si, Co) high entropy alloys produced by powder metallurgy" Vacuum 187: 110143.
  17. Fatma KILIÇ DOKAN and Mehmet KURU (2021). "A new approach to optimize the synthesis parameters of TiO2 microsphere and development of photocatalytic performance". Journal of Materials Science: Materials in Electronics 32, 640–655(2021).
  18. Mevlüt Gürbüz Tuğba Mutuk, Pınar Uyan, Mechanical, Wear and Thermal Behaviors of Graphene Reinforced Titanium Composites, Metals and Materials International, 1-9, 2021

2020 Yılı Yayınları

  1. Burgaz, Engin, and Mert Goksuzoglu. "Effects of magnetic particles and carbon black on structure and properties of magnetorheological elastomers." Polymer Testing 81 (2020): 106233.
  2. DEMİRCAN ÖZGÜR,Aldarkazali Ali,İNANÇ İBRAHİM, ESKİZEYBEK VOLKAN (2020). Investigation of the effect of CNTs on the mechanical properties of LPET/glass fiber thermoplastic composites. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 33(12).
  3. Ö Demircan, K Kadıoğlu, P Çolak, E Günaydın, M Doğu, N Topalömer, Compression after impact and Charpy impact characterizations of glass fiber/epoxy/MWCNT composites, Fibers and Polymers, 21 (8), 1824-1831
  4. Karaoglanli, A. C., Doleker, K. M. and Ozgurluk, Y. (2020). " Interface failure behavior of yttria stabilized zirconia (YSZ), La2Zr2O7, Gd2Zr2O7, YSZ/La2Zr2O7 and YSZ/Gd2Zr2O7 thermal barrier coatings (TBCs) in thermal cyclic exposure" Materials Characterization 159: 110072.
  5. Doleker, K. M. (2020). "The Examination of Microstructure and Thermal Oxidation Behavior of Laser-Remelted High-Velocity Oxygen Liquid Fuel Fe/Al Coating" Journal Of Materials Engineering And Performance 29(5) 3220–3232.
  6. Doleker, K. M. (2020). "ZrO2-5% CaO Termal Bariyer Kaplama (Tbc) Sisteminin Sıcak Korozyon Direnci" El-Cezeri Journal of Science and Engineering 7 (2), 628-638.
  7. Doleker, K. M. and Karaoglanli, A. C. (2020). "Çevrimli ve İzotermal Sıcak Korozyonun Nikel Esaslı Süper Alaşım Malzemeye Etkisi" El-Cezeri Journal of Science and Engineering 7 (2), 763-772.
  8. Erdogan, A., Doleker, K. M. and Zeytin, S. (2020). " Effect of laser re-melting on electric current assistive sintered CoCrFeNiAlxTiy high entropy alloys: Formation, micro-hardness and wear behaviors" Surface and Coatings Technology 399: 126179.
  9. Parlakyigit, A. S., Ozkan, D., Oge, M., Ozgurluk, Y., Doleker, K. M., Gulmez, T. and Karaoglanli, A. C. (2020). " Formation and Growth Behaviour of Thermally Grown Oxide Layer in Thermal Barrier Coatings with HVOF Sprayed Nickel-Chromium Bond Coats" Emerging Materials Research 9(2): 451-459.
  10. Karaoglanli, A. C., Ozgurluk, Y. and Doleker, K. M. (2020). " Comparison of microstructure and oxidation behavior of CoNiCrAlY coatings produced by APS, SSAPS, D-gun, HVOF and CGDS techniques" Vacuum 180: 109609.
  11. Doleker, K. M., Karaoglanli, A. C., Ozgurluk, Y. and Kobayashi, A. (2020). " Performance of single YSZ, Gd2Zr2O7 and double-layered YSZ/Gd2Zr2O7 thermal barrier coatings in isothermal oxidation test conditions" Vacuum 180: 109401.
  12. Mehmet Kuru, Tuğba Şaşmaz Kuru, Ertuğrul Karaca, Sadık Bağcı (2020). "Dielectric, magnetic and humidity properties of Mg–Zn–Cr ferrites". Journal of Alloys and Compounds 836, 25, 155318.
  13. KURU Mehmet, Sami PEKDEMIR (2020). "Polydopamine Mediated Growth of Ag Nanostructures on ZnO Thin Films for Catalytic Degradation of Organic Dyes". Gazi University Journal of Science 33,4 857 - 870.
  14. KURU Mehmet (2020). "The Effect of Thickness on Photocatalytic Performance in MgZnO Thin Films". Sakarya University Journal of Science 24(4), 586-595.
  15. Tuğba Mutuk, A.Kübra Demirbaş, Sinem Çevik, Başak Mesci Oktay, The Effects of Casting Industry Waste of Scale Instead of Cement on The Mechanical And Microstructure Properties, International Journal of Applied Ceramic Technology, 17 (1), 197-204, 2020
  16. Tuğba Mutuk, Mevlüt Gürbüz, Prediction of wear properties of graphene-Si3N reinforced titanium hybrid composites by artificial neural network, Materials Research Express 7 (8), 086511, 2020.
  17. Tuğba Mutuk, Mevlüt Gürbüz, Mechanical and wear properties of Si3N4 reinforced titanium composites, Indian Journal of Engineering & Materials Sciences 27, 1027-1036, 2020

2019 Yılı Yayınları

  1. Burgaz, Engin. Polyurethane Insulation Foams for Energy and Sustainability. Advanced Structured Materials 111 (2019) Springer Nature Switzerland AG, ISBN: 978-3-030-19557-1.
  2. Burgaz, Engin, and Caner Kendirlioglu. "Thermomechanical behavior and thermal stability of polyurethane rigid nanocomposite foams containing binary nanoparticle mixtures." Polymer Testing 77 (2019): 105930.
  3. Burgaz, E., Erciyes, A., Andac, M., & Andac, O. (2019). Synthesis and characterization of nano-sized metal organic framework-5 (MOF-5) by using consecutive combination of ultrasound and microwave irradiation methods. Inorganica Chimica Acta, 485, 118-124.
  4. Burgaz, E., Gencoglu, O., & Goksuzoglu, M. "Carbon black reinforced natural rubber/butadiene rubber and natural rubber/butadiene rubber/styrene-butadiene rubber composites: Part I: Rheological, mechanical and thermomechanical properties." Research on Engineering Structures and Materials 5, no. 3 (2019): 233.
  5. Burgaz, E., Gencoglu, O., & Goksuzoglu, M. " Carbon black reinforced natural rubber/butadiene rubber and natural rubber/butadiene rubber/styrene-butadiene rubber composites: Part II. Dynamic mechanical properties and fatigue behavior." Research on Engineering Structures and Materials 5, no. 3 (2019): 247
  6. S. E. Akkaya, B. Mesci Oktay, and S. Çoruh, The Performance Of Heavy Metal Leaching From Copper And Zinc Slags Using Natural And Waste Materials, International Journal of Emerging Technology and Advanced Engineering, Volume 9, Issue 5, May 2019, pp.25-31.
  7. Kaplan, M., Uyaner, M., Ozgurluk, Y., Doleker, K. M. and Karaoglanli, A. C. (2019). "Evaluation of Hot Corrosion Behavior of APS and HVOF Sprayed Thermal Barrier Coatings (TBCs) Exposed to Molten Na2SO4+ V2O5 Salt at 1000° C. " In Engineering Design Applications. (pp. 441-459). Springer, Cham. (Book Chapter)
  8. Unal, O., Karaoglanli, A. C., Ozgurluk, Y., Doleker, K. M., Maleki, E. and Varol, R. (2019). "Wear Behavior of Severe Shot Peened and Thermally Oxidized Commercially Pure Titanium." In Engineering Design Applications (pp. 461-470). Springer, Cham. (Book Chapter)
  9. Doleker, K. M., Ozgurluk, Y., Ahlatci, H. and Karaoglanli, A. C. (2019). "Evaluation of oxidation and thermal cyclic behavior of YSZ, Gd2Zr2O7 and YSZ/Gd2Zr2O7 TBCs" Surface and Coatings Technology 371: 262-275.
  10. Ozgurluk, Y., Doleker, K. M., Ozkan, D., Ahlatci, H. and Karaoglanli, A. C. (2019). "Cyclic Hot Corrosion Failure Behaviors of EB-PVD TBC Systems in the Presence of Sulfate and Vanadate Molten Salts." Coatings 9(3): 166-176.
  11. Doleker, K. M., Odabas, O., Ozgurluk, Y., Asgarov, K. and Karaoglanli, A. C. (2019). "Effect of high temperature oxidation on Inconel 718 and Inconel 718/YSZ/Gd2Zr2O7" Materials Research Express 6: 086456.
  12. Ozgurluk, Y., Doleker, K. M. and Karaoglanli, A. C. (2019). "Investigation of the effect of V2O5 and Na2SO4 melted salts on thermal barrier coatings under cyclic conditions" Anti-Corrosion Methods and Materials 66(5): 644-650.
  13. Erdogan, A., Doleker, K. M. and Zeytin, S. (2019). "Al and Ti Effect on High Temperature Oxidation Behaviour of CoCrFeNi Based High Entropy Alloys" The Journal of The Minerals, Metals & Materials Society (JOM) 71(10): 3499-3510.
  14. Yener, T., Doleker, K. M., and Erdogan, A. (2019). "High temperature oxidation behavior of low temperature aluminized Mirrax® ESR steel" Materials Research Express 6: 116407.
  15. Mehmet Kuru and Hilal Narsat (2019). "The effect of heat treatment temperature and Mg doping on structural and photocatalytic activity of ZnO thin films fabricated by RF magnetron co-sputtering technique". Journal of Materials Science: Materials in Electronics 30, 18484–18495
  16. Tuğba Şaşmaz Kuru and Mehmet Kuru (2019)."Structural, optical, and dielectric properties of Cu, Ni-doped Zn ferrites". Journal of the Australian Ceramic Society 55, 781–788.
  17. Mehmet Kuru, Tuğba Şaşmaz Kuru, Sadık Bağcı (2019)."The role of the calcium concentration effect on the structural and dielectric properties of mixed Ni–Zn ferrites". Journal of Materials Science: Materials in Electronics 30, 5438–5453.
  18. Tuğba Mutuk, Mevlüt Gürbüz. Effect of Pure Titanium Particle Size on Density, Hardness, Wear Resistance and Microstructure Properties. Journal of Metals, Materials, Minerals, 29,3, 54-59, 2019.
  19. Suna Avcıoğlu, Tuğba Mutuk, Mevlüt Gürbüz, Sinem Çevik, Single Step Solid- State Synthesis of Lanthanum Molybdate, Advances in Materials Science, 19, 3,46-54, 2019.
  20. Tuğba Mutuk, Mevlüt Gürbüz, “Fabricating Graphene-Titanium (< 30μm) Composites by Powder Metallurgy Method: Microstructure and Mechanical Properties”. Duzce University Journal of Science and Technology, 7(2), 89-97, 2019
  21. Mevlüt Gürbüz, Tuğba Mutuk, “Karbon Esaslı Malzeme Takviyeli Titanyum Kompozitler Ve Grafen Üzerine Yeni Eğilimler”, Mühendis Makina Dergisi 60 (695), 2019.

2018 Yılı Yayınları

  1. Al-darkazali Ali,ÇOLAK PINAR,Kadıoğlu Kemal,GÜNAYDIN ERDİNÇ,İNANÇ İBRAHİM,DEMİRCAN ÖZGÜR (2018). Mechanical Properties of Thermoplastic and Thermoset Composites Reinforced with 3D Biaxial Warp-knitted Fabrics. Applied Composite Materials, 25(4), 939-951.,
  2. Ozgurluk, Y., Doleker, K. M. and Karaoglanli, A. C. (2018). "Hot Corrosion Behavior of YSZ, Gd2Zr2O7 and YSZ/Gd2Zr2O7 Thermal Barrier Coatings Exposed to Molten Sulfate and Vanadate Salt." Applied Surface Science 438: 96-113.
  3. Doleker, K.M., Ozgurluk, Y., Ozkan, D., Mesekiran, N. and Karaoglanli, A.C. (2018). "Comparison of Microstructures and Oxidation Behaviors of Yttria And Magnesia Stabilized Zirconia Thermal Barrier Coatings (TBC)." Materiali in tehnologije 52(3): 315-322.
  4. Ozgurluk, Y., Doleker, K. M., Ahlatci, H. and Karaoglanli, A. C. (2018). "Investigation of hot corrosion behavior of thermal barrier coating (TBC) systems with rare earth contents." Arabian Journal of Geosciences 11(11): 267.
  5. Doleker, K. M., Ozgurluk, Y. and Karaoglanli, A. C. (2018). "Isothermal oxidation and thermal cyclic behaviors of YSZ and double-layered YSZ/La2Zr2O7 thermal barrier coatings (TBCs)." Surface and Coatings Technology 351: 78-88.
  6. Doleker, K. M., Ozgurluk, Y., Parlakyigit, S., Ozkan, D., Gulmez, T. and Karaoglanli, A. C. (2018). "Oxidation Behavior of NiCr/YSZ Thermal Barrier Coatings (TBCs)." Open Chemistry 16(1): 876-881.
  7. Doleker, K. M., Ozgurluk, Y., Ahlatci, H. and Karaoglanli, A. C. (2018) "Isothermal Oxidation Behavior of Gadolinium Zirconate (Gd2Zr2O7) Thermal Barrier Coatings (TBCs) produced by Electron Beam Physical Vapor Deposition (EB-PVD) technique." Open Chemistry 16(1): 986-991.
  8. Ozgurluk, Y., Doleker, K. M., Ahlatci, H., Ozkan, D. and Karaoglanli, A. C. (2018). "The Microstructural Behavior Investigation of Vermiculite-Infiltrated Electron Beam Physical Vapor Deposition Thermal Barrier Coatings." Open Chemistry 16(1): 1106-1110.
  9. Tuğba Şaşmaz Kuru, Mehmet Kuru, Sadık Bağcı. (2018). "Dielectric, humidity behavior and conductivity mechanism of Mn0.2Ni0.3Zn0.5Fe2O4 ferrite prepared by co-precipitation method". Journal of Materials Science: Materials in Electronics 29, 17160–17169,
  10. Tuğba Şaşmaz Kuru, Mehmet Kuru, Sadık Bağcı (2018). "Structural, dielectric and humidity properties of Al-Ni-Zn ferrite prepared by co-precipitation method". Journal of Alloys and Compounds 753, 483-490.
  11. A.E Özmetin, M. Kuru, E. Ongun, A. Özmetin, M. Hançer (2018)." Fabrication and Characterization of Permanent Magnetic SmCo5 Thin Films by SQUID Magnetometer". Materials Science Forum 915, 16-21.
  12. Mevlüt Gürbüz, Tuğba Mutuk “Effect of process parameters on hardness and microstructure of graphene reinforced titanium composites”, Journal of Composite Materials, 52, 4, 2018.

2017 Yılı Yayınları

  1. Karaoglanli, A. C., Doleker, K. M. and Ozgurluk, Y. (2017). "State of the Art Thermal Barrier Coating (TBC) Materials and TBC Failure Mechanisms. " In Properties and Characterization of Modern Materials (441-452). Springer Singapore. (Book Chapter)
  2. Doleker, K. M. and Karaoglanli, A. C. (2017). "Comparison of oxidation behavior of shot-peened plasma spray coatings with cold gas dynamic spray coatings." Oxidation of Metals 88(1-2): 121-132.
  3. Karaoglanli, A. C., Oge, M., Doleker, K. M. and Hotamis, M. (2017). "Comparison of tribological properties of HVOF sprayed coatings with different composition." Surface and Coatings Technology 318: 299-308.
  4. Doleker, K. M. and Karaoglanli, A. C. (2017). "Comparison of oxidation behavior of YSZ and Gd2Zr2O7 thermal barrier coatings (TBCs)." Surface and Coatings Technology 318: 198-207.
  5. Doleker, K. M., Ahlatci, H. and Karaoglanli, A. C. (2017). "Investigation of Isothermal Oxidation Behavior of Thermal Barrier Coatings (TBCs) Consisting of YSZ and Multilayered YSZ/ Gd2Zr2O7 Ceramic Layers." Oxidation of Metals 88(1-2): 109-119.
  6. Başak Mesci Oktay, Elif Odabaş, Determining Mechanical and Physical Propertiesof Phospho-Gypsum and Perlite-AdmixturedPlaster Using an Artificial Neural Networkand Regression Models, Polish Of Environmental Studies, (2017) 2425-2430.
  7. Başak Mesci Oktay, Elif Odabaş, Mesut Kurnaz, Fosfojips ve Perlit Katkılı Sıvaların Su Emme Miktarlarının 24 Deneysel Tasarım Yöntemiyle Belirlenmesi, International Journal of Multidisciplinary Studies and Innovative Technologies, 1(1), 2017 pp. 18 – 20. Başak Mesci Oktay, Elif Odabaş, Mesut Kurnaz, Ekolojik Malzemeler Kulllanarak Üretilen Isı Yalıtım Levhalarının Özelliklerinin İncelenmesi, International Journal of Multidisciplinary Studies and Innovative Technologies, 1(1), 2017 pp. 15 – 27.
  8. E Ongun, M Kuru, M Serhatlıoğlu, M Hançer, AE Ozmetin (2017)."Fabrication and characterization of SmCo5/Nb ferromagnetic/superconducting hybrid thin films grown by RF magnetron sputtering technique. Vacuum 144, 116-124.
  9. Salih Veziroglu, Mehmet Kuru, Muhammad Zubair Ghori, Fatma Kilic Dokan, Alexander Martin Hinz, Thomas Strunskus, Franz Faupel, Oral Cenk Aktas (2017). "Ultra-fast degradation of methylene blue by Au/ZnO-CeO2 nano-hybrid catalyst". Materials Letters 209, 486-491.
  10. M Kuru, AE Ozmetin, A Ozmetin, O Sahin (2017). "The role of heat treatment on the structural and nano-mechanical properties of SmCo5 thin films grown by RF magnetron sputtering technique". Ceramics International 43, 4 3893-3899.
  11. M Kuru, O Sahin, S Ozarslan, AE Ozmetin (2017). "Fabrication and mechanical characterization of rare earth permanent magnet SmCo5 films". Journal of Alloys and Compounds 694,726-732.
  12. Mehmet Kuru, Erhan Ongun and Ali Esad Ozmetin (2017). "Structural and low temperature transport properties of PbBi thin films fabricated by rapid solidification technique". Materials Research Express 4, 6.
  13. Sinem Çevik, Tuğba Mutuk, A.Kübra Demirbaş, Başak Mesci Oktay “Mechanical and microstructural characterization of cement mortars prepared by waste foundry sand (WFS)”, Journal of Australian Ceramic Society, 53, 829–837, 2017.
  14. Tuğba Mutuk, Mevlüt Gürbüz “Grafen Takviyesi Miktarının Titanyum Matrisli Kompozitlerin Özelliklerine Etkisi”, Gaziosmanpasa Journal of Scientific Research, Özel Sayı-6, 2017.

2016 Yılı Yayınları

  1. Burgaz, Engin. "Thermomechanical analysis of polymer nanocomposites." In Polymer Nanocomposites, pp. 191-242. Springer, Cham, 2016.
  2. Halil Mutuk, Tuğba Mutuk, Hasan Gümüş, Başak Mesci Oktay, “Shielding Behaviors and Analysis of Mechanical Treatment of Cements Containing Nanosized Powders”, Acta Physıca Polonıca A, 130, 2016
  3. B. MESCİ OKTAY, S. ELEVLİ, and S. ÇORUH, “MALACHITE GREEN DYE REMOVAL USING MONTMORILLONITE CLAY FULL FACTORIAL DESIGN ANALYSIS,” International Journal of Advances in Science Engineering and Technology, 2016, pp. 13–17.

2015 Yılı Yayınları

  1. Karaoglanli, A. C., Doleker, K. M., Demirel, B., Turk, A. and Varol, R. (2015). "Effect of shot peening on the oxidation behavior of thermal barrier coatings. " Applied Surface Science 354: 314-322.
  2. AE Ozmetin, E Ongun, Mehmet Kuru, E Yazici (2015). "Fabrication and characterization of ferromagnetic–superconducting hybrid films grown by combined PVD techniques". Applied Surface Science 350, 2-5.
  3. A.E.Ozmetin, O.Sahin, E.Ongun, M.Kuru (2015). "Mechanical characterization of MgB2 thin films using nanoindentation technique". Journal of Alloys and Compounds 619, 262-266.

2014 Yılı Yayınları

  1. Burgaz, Engin, Mehmet Yazici, Murat Kapusuz, Sevim Hamamci Alisir, and Hakan Ozcan. "Prediction of thermal stability, crystallinity and thermomechanical properties of poly (ethylene oxide)/clay nanocomposites with artificial neural networks." Thermochimica acta 575 (2014): 159-166.
  2. Burgaz, Engin. "Structure-Property Correlations of Poly (ethylene oxide) Nanohybrids with Layered Silicates and Silica Nanoparticles." In Handbook of Polymernanocomposites. Processing, Performance and Application, pp. 87-107. Springer, Berlin, Heidelberg, 2014
  3. DUMAN GÜLENGÜL,ASLAN İSMAİL,ÖZER ASUMAN YEKTA,İNANÇ İBRAHİM,TARALP ALPAY (2014). Liposome gel and lipogelosome formulations containing sodium hyaluronate. Journal of Liposome Research, 24(4), 259-269.
  4. Tugba Mutuk, Basak Mesci, “Analysis of mechanical properties of cement containing boron waste and rice husk ash using full factorial design”, Journal of Cleaner Production, 69, 128-132, 2014.

2013 Yılı Yayınları

  1. Başak Mesci, A Novel Approach For Modeling Cu2+ And Zn2+ Adsorption From Industrial Leachate By Peanut Shells, Environmental Engineering and Management Journal, 12 (12) (2013) 2289-2298.
  2. N. Gamze Turan, Başak Mesci, Okan Ozgonenel, Response surface modeling of Cu(II) removal from electroplating waste by adsorption: Application of Box-Behnken experimental design, CLEAN – Soil, Air, Water, 41 (3) (2013) 304-312.

2012 Yılı Yayınları

  1. ATILGAN CANAN,İNANÇ İBRAHİM,ATILGAN ALİ RANA (2012). On modifying properties of polymeric melts by nanoscopic particles. Journal of Polymer Science Part B: Polymer Physics, 50(23), 1653-1662.
  2. Başak Mesci, N. Gamze Turan, Okan Ozgonenel, Investigation of the possibility of copper removal from industrial leachate by raw and calcined phosphogypsum: D-Optimal and Taguchi designs, CLEAN – Soil, Air, Water, 40 (8) (2012) 850-855.
  3. Başak Mesci, Sermin Elevli, Recycling Of Chromite Waste For Concrete: Full Factorial Design Approach, International Journal of Environmental Research, 6 (1) (2012) 145-150.

2011 Yılı Yayınları

  1. Burgaz, Engin. "Poly (ethylene-oxide)/clay/silica nanocomposites: Morphology and thermomechanical properties." Polymer 52, no. 22 (2011): 5118-5126.
  2. N. Gamze Turan, Başak Mesci, Adsorption Of Copper(II) And Zinc(II) Ions By Various Agricultural By-products. Experimental Studies And Modeling, Environment Protection Engineering, 4 (2011) 143-161.
  3. Mesci, B., Çoruh, S., Ergun, O.N., Use Of Selected Industrial Waste Materials In Concrete Mixture, Environmental Progress & Sustainable Energy, 30 (3) (2011) 368-376.
  4. Gamze Turan, Başak Mesci, Okan Ozgonenel, The Use Of Artificial Neural Networks (ANN) For Modeling Of Adsorption Of Cu(II) From Industrial Leachate By Pumice, Chemical Engineering Journal, 171 (3) (2011) 1091-1097.
  5. Gamze Turan, Sermin Elevli, Başak Mesci, Adsorption Of Copper And Zinc Ions On Illite: Determination Of The Optimal Conditions By The Statistical Design Of Experiments, Applied Clay Science, 52 (4) (2011) 392-399.
  6. Nurdan Gamze Turan, Başak Mesci, Use of Pistachio Shells As An Adsorbent For The Removal Of Zinc(II) Ion, Clean-Soil Air Water 39 (5) (2011) 475-481.
  7. N. Gamze Turan, Başak Mesci, Okan Ozgonenel, Artificial Neural Network (ANN) Approach For Modeling Zn (II) Adsorption From Leachate Using A New Biosorbent, Chemical Engineering Journal, 173 (1) (2011) 98-105.
  8. Başak MESCİ, Adsorptive Removal Of Zinc By Bentonite: Application Of Time Series Modeling Method, Archives of Environmental Protection, 37 (3) (2011) 101-113.

2010 Yılı Yayınları

  1. Kelarakis, Antonios, Rafael Herrera Alonso, Huiqin Lian, Engin Burgaz, Luiz Estevez, and Emmanuel P. Giannelis. "Nanohybrid nafion membranes for fuel cells." In ACS Symp. Ser, vol. 1034. 2010.

2009 Yılı Yayınları

  1. Burgaz, Engin, Huiqin Lian, Rafael Herrera Alonso, Luis Estevez, Antonios Kelarakis, and Emmanuel P. Giannelis. "Nafion–clay hybrids with a network structure." Polymer 50, no. 11 (2009): 2384-2392.
  2. Mesci, B., Çoruh, S., Ergun, O.N., Leaching Behaviour And Mechanical Properties Of Copper Flotation Waste In Stabilized/Solidified Products, Waste Management & Research, 27 (1) (2009) 70-77.

2008 Yılı ve Öncesi Yayınları

  1. SERPENGÜZEL ALİ,KURT ADNAN,İNANÇ İBRAHİM,CAREY JAMES,MAZUR ERIC (2008). Luminescence of black silicon. Journal of Nanophotonics, 2(1), 21770-21775.
  2. Zhu, Yuqing, Engin Burgaz, Samuel P. Gido, Ulrike Staudinger, Roland Weidisch, David Uhrig, and Jimmy W. Mays. "Morphology and tensile properties of multigraft copolymers with regularly spaced tri-, tetra-, and hexafunctional junction points." Macromolecules 39, no. 13 (2006): 4428-4436.
  3. Zheng, Lei, Sheng Hong, Grégoire Cardoen, Engin Burgaz, Samuel P. Gido, and E. Bryan Coughlin. "Polymer nanocomposites through controlled self-assembly of cubic silsesquioxane scaffolds." Macromolecules 37, no. 23 (2004): 8606-8611
  4. Tripathy, Amiya R., Engin Burgaz, Stephen N. Kukureka, and William J. MacKnight. "Poly (butylene terephthalate) nanocomposites prepared by in-situ polymerization." Macromolecules 36, no. 23 (2003): 8593-8595.
  5. Burgaz, Engin, and Samuel P. Gido. "T-Junction Grain Boundaries in Block Copolymer− Homopolymer Blends." Macromolecules 33, no. 23 (2000): 8739-8745.
  6. Yilgör, E., E. Burgaz, E. Yurtsever, and I. Yilgör. "Comparison of hydrogen bonding in polydimethylsiloxane and polyether based urethane and urea copolymers." Polymer 41, no. 3 (2000): 849-857.